Waxon Detailing Forum
polo GTi - Printable Version

+- Waxon Detailing Forum (http://www.waxon.co.za)
+-- Forum: General & Galleries (/forumdisplay.php?fid=8)
+--- Forum: Show Room (/forumdisplay.php?fid=26)
+--- Thread: polo GTi (/showthread.php?tid=964)

polo GTi - mr. MO - 07-01-2010 05:51 PM

Another Polo GTI detailed Wink


Entire detail took 7 hours
Application by Megs G220

PROCESS:
Washed wheels with Megs Wheel Brightener
Washed car with Megs Hyper wash
Cleaned the engine bay and dressed plastic components
Clayed
Cleaned interior and applied Wynns leather cream
Quick wash again
Applied Megs Ultimate Compound – I wasn’t really happy, probably coz I didn’t have a cutting pad?
Applied Auto Glym S.R.P
Applied C.G Butter wax
Adams detail spray
Rim wax
Tyres dressed with Endurance tyre gel
Applied Megs plast X polish to the lights
Polished tail pipes with Autosol
Dressed plastic trimming with Megs Natural shine protectant

BEFORE:

[Image: Untitled-17-1.jpg]


[Image: Untitled-2-8.jpg]


[Image: Untitled-4-8.jpg]
Quick wash after claying


[Image: Untitled-6-9.jpg]

Swirls Plthumbsdown

[Image: Untitled-8-7.jpg]


AFTER:


[Image: Untitled-14-4.jpg]


[Image: Untitled-13-2.jpg]


[Image: Untitled-12-5.jpg]


[Image: Untitled-1-9.jpg]


[Image: Untitled-9-5.jpg]


Thanks for viewing...

RE: polo GTi - calypso - 07-01-2010 06:39 PM

Looks nice and glossy. Did you manage to remove the swirls? What pad were you struggling with?

RE: polo GTi - Carn - 07-01-2010 09:26 PM

Nicely done yet again Mr. Mo Clap

As Calypso mentioned what pads did you use and how did you find the paintwork?

RE: polo GTi - mr. MO - 07-01-2010 10:55 PM

Thanks guys

I used the Megs Yellow polishing pad, i purchased my machine recently so im not clued up.
The swirls were gone, just those surface scratches were a prob.

RE: polo GTi - Woodie - 08-01-2010 07:41 AM

With the last few details you have posted here and on other forums, I am convinced that you have landed a contract with the local VW agent to prep their used vehicles for delivery Bluebiggrin.

End results look good.


(07-01-2010 10:55 PM)mr. MO Wrote:  The swirls were gone, just those surface scratches were a prob.

One of the frustrating anomalies of detailing - swirling hides/masks a lot of the more serious RIDS. These then become glaringly obvious once the swirls are removed.

RE: polo GTi - mr. MO - 08-01-2010 11:36 AM

Thanks Woodie...
I guess in Durban its only the VW owners that care about their cars...Its very different here..

I'll try something with more cutting power from the professional range

RE: polo GTi - Rich - 08-01-2010 05:09 PM

Vewy, vewy nice!!

RE: polo GTi - Starvekos - 08-01-2010 10:21 PM

Nicely done Mo

Don't give up on Ultimate Compound and polishing pad combination. I've tried it using a Meguiar's G220 dual action polisher and a Makita BO6040 DA polisher, and it works. Revisit your process / application:
  • is your pad clean throughout the polishing process;
  • don't drench the pad with too much product or quick detailer (prepping the pad) as this reduces the cutting power;
  • most importantly, work in small sections at a time. Trying to buff a full panel in one go will not get the best out of your polish;
  • apply "enough" pressure on the head of the machine


RE: polo GTi - Kido - 09-01-2010 08:43 AM

(07-01-2010 10:55 PM)mr. MO Wrote:  Thanks guys

I used the Megs Yellow polishing pad, i purchased my machine recently so im not clued up.
The swirls were gone, just those surface scratches were a prob.

Nice outcome there Mr Mo Thumb

As priority I usually aim to remove swirls and I try not to focus too much on removing the deep scratches instead, after polishing I ensure that I clean the paint with a paint cleaner (Megs Paint Cleaner) which immediately reduces their (RDS) appearence, then I apply a nice glaze (CG EZ Creme Glaze) which further cleans and fills these areas resulting in further reducing their visability and I let the glaze cure for 20 min before I proceed with a wax/sealant. This process results in the RDS been less visible than before intstead of eating away at the clear.

Keep up the good work Thumb

RE: polo GTi - mr. MO - 09-01-2010 09:40 AM

I do... I apply 1 spray of Quik Detailer when i commence and during the process I just wipe the pad with a damp microfibre towel.

I don't apply much pressure tho... afraid of damaging the paint.

Will give it a shot again.... thanks