Paint Correction - Shield Orbital

Paint Correction - Shield Orbital - Printable Version

+- Waxon Detailing Forum (http://www.waxon.co.za)
+-- Forum: General & Galleries (/forumdisplay.php?fid=8)
+--- Forum: Show Room (/forumdisplay.php?fid=26)
+--- Thread: Paint Correction - Shield Orbital (/showthread.php?tid=565)

Paint Correction - Shield Orbital - D.O.Double G - 03-02-2009 12:01 PM

just wanted to show what a shield orbital buffer can do. I was Surprised.

Some Before Pics

Look at the Difference on the bonnet between the Blue tape: Swirls.....

Now look at this picture:
I used the Shield Orbital with Chemical Guys Laser buff. It basically took me about 10 mins less to do this. As you can see the correction is not completed but its just one slow pass with the machine.

Some More scratches:

After One Pass:

2 passes:

So ja, there you have it.Some correction can be achieved with the shield Buffer.

Heads up to Pravin.

Thanx man.

RE: Paint Correction - Shield Orbital - freerider - 03-02-2009 12:04 PM

Personally I used a shield orbital in my earlier stages of detailing and also got some cut, but it is negligible compared to what a purpose built polishing machine will give you and not to mention the difference in time spent working, between the 2

RE: Paint Correction - Shield Orbital - D.O.Double G - 03-02-2009 12:19 PM

Wrking time...If it took me 10 mins with the shild, what would it take you with the DA or rotary?

RE: Paint Correction - Shield Orbital - freerider - 03-02-2009 02:31 PM

Cant really say, but you will definitely get better results in a whole lot less time.

RE: Paint Correction - Shield Orbital - Carn - 03-02-2009 02:54 PM

It seems ok, what car was it on ?

Have never seen a Shield do anywhere near that kind of correction on any of the harder paints out there though Rofl

RE: Paint Correction - Shield Orbital - D.O.Double G - 03-02-2009 03:42 PM

it was on a 2005 Toyota tazz. I think its 2005 :-)

RE: Paint Correction - Shield Orbital - calypso - 03-02-2009 07:21 PM

Wow, i never knew my 22" monitor would not be big enough. A proper DA or Rotary machine will get more correction done in a shorter period of time than a Shield orbital. I also had a shield but found it didnt really add much over what hand polishing could do. But not bad for a first try. Just try take before and after pics of the same spots and in the same light, that will give a better representation of the level of correction which will make it easier for you to evaluate your work and quicker for you to learn how to take it a step further.
Tazz paint, though im not sure if you can call it Japanese, I dont think it would be very high on the hardness scale, let alone ceramiclear levels.
But keep it up enthusiasm is great.

RE: Paint Correction - Shield Orbital - Carn - 03-02-2009 07:24 PM

All Toyota's are pretty much like Honda's as far as I am aware, they both sport what is often referred to as 'soft' clear coats Wink

Try get yourself a black panel from a newish german vehicle to practice on. We have found the newer Audi's and MB clear coats to be about the hardest paints out there at the moment Wink

RE: Paint Correction - Shield Orbital - freerider - 03-02-2009 07:34 PM

(03-02-2009 07:24 PM)Carn Wrote: All Toyota's are pretty much like Honda's as far as I am aware, they both sport what is often referred to as 'soft' clear coats

Try get yourself a black panel from a newish german vehicle to practice on. We have found the newer Audi's and MB clear coats to be about the hardest paints out there at the moment

Ask Megesh and myself about BMW M5 paint Uhoh2

RE: Paint Correction - Shield Orbital - Carn - 03-02-2009 08:24 PM

(03-02-2009 07:34 PM)freerider Wrote: Ask Megesh and myself about BMW M5 paint

Most of ze newer germans have ze hard paint ya Bluebiggrin